Compatible 1.25Gbps SFP, Multimode, 550km, LC, 850nmVCSEL

Compatible 1.25Gbps SFP, Multimode, 550km, LC, 850nmVCSEL

Part No:E-C4481D-(X)
SKU: E-C4481D-(X)
User Review:
(0)       Write a review
Price:$
18.48
Compatibility: Cisco, HP, Juniper, Nortel, Brocade, Force10, Ciena, Allied Telesis, Dell, Extreme, D-link, Linksys, Telco, Calix, Adtran, and 3Com

Data Rate: 1.25Gbps

Wavelength: 850nmVCSEL

Distance/Connector: 550m; LC

Temperature/DDM: 0~70c; w DDM

Compatible to Cisco PN: GLC-SX-MM=    GLC-SX-MMD=      SFP-GE-S=    1000BASE-SX

Application:
Fiber Ethernet
Switch to switch interface
Switched backplane applications
Fiber channel 
SONET/SDH/ATM


Features and Benefit:
Duplex and Single fiber LC/SC receptacle optical interfaces compliant
Single +3.3V power supply
IEEE 802.3 Gigabit Ethernet and fiber Channel compliant
100% compatible with all major system brands, such as: Cisco, HP, Juniper, Nortel, Brocade, Force10, Ciena, Allied Telesis, Dell, Extreme, D-link, Linksys, Telco, Calix, Adtran, and 3Com
Hot-pluggable
Diagnostic monitor as enhanced functions for SFP(optional)
Receiver Loss of Signal Output
AC coupling of PECL signals
Serial ID module on MOD(0-2)
Excellent EMI and ESD protection
550M ~ 160Km for GE distance options
International Class 1 laser safety certified
Transmitter disable input
Operating temperature range: 0 ~ +70c and -40 ~ +85c (hardened, extended temperature, industrial temperature)
DDM module 
A wide range of fiber types, wavelengths and transmission rates
Two year standard warranty
RoHS Compliant


Absolute Maximum Ratings:
Operating of the transceiver beyond the Absolute Conditions Listed in Table 1 will degrade or damage the product. It’s not implied that the product would function above the recommended operating environment, it’s possible to reduce the reliability and lifetime of device if Recommended Operating Conditions are exceeded (Refer to table 2)

Table 1. Absolute Maximum Ratings

Parameter Symbol Minimum Maximum Unit
Storage Temperature TS -40 85
Relative Humidity RH 5 95 %
Supply Voltage VCC -0.5 4.0 V
 
Table 2.  Recommended Operating Conditions
Parameter Symbol Min Typ Max Unit
Operating Case Temperature (Standard) TC -10 25 70
(Hardened) TC -40 25 85
Supply Voltage VCC 3.135 3.3 3.465 V
Data Rate - - 1.25 - Gb/s

 * The Matrix covers only part of Cisco PNs. Please contact us by either email or phone call for any question about compatibility vs. Part Number of the brands, or special spec requirements:
    Email: question@electrep.com
    Ph: 650-226-3165

** There may be a letter in the brackets () at the end of PN for the system brand that the SFP+ module is compatible to - e.g. -(J) means "Juniper-Compatible"

 

Downloads

PDF is not Available