Electrep provides Telecom quality, high performance copper gigabit SFP transceivers with RJ45 Copper interface that provide10/100/1000 or 1000 Mbps Ethernet data rates., This Form Factor Pluggable Modules are 100% compatible with all major system brands, such as: Cisco, HP, Juniper, Nortel, Brocade, Force10, Ciena, Allied Telesis, Dell, Extreme, D-link, Linksys, Telco, Calix, Adtran, and 3Com. The modules have been used by Telecom SPs, MSOs, Utility Telecom, and enterprise/campus networks for multiple years with extremely low return and supper reputation. The series supports extended temperature (industrial temperature / hardened).
Learn MoreApplication:
1.25 Gigabit Ethernet over Cat5/Cat6/Cat6a cables
Switch to Switch interface
Switched backplane applications
Router/Server interface
Other optical transmission systems
Features and Benefit:
Up to 1.25Gbps bi-direction data links
100m transmission over unshielded twisted-pair (UTP) Category 5 Cable
1000 BASE-T operation in host systems with SERDES interface
10/100/1000BASE-T operation in host systems with SGMII interface
Hot-pluggable capability
SFP form with compact RJ-45 connector
Detailed product information in EEPROM
Access to physical layer IC via 2-wire serial bus
With Spring latch for high density application
Very low EMI and excellent ESD protection
Single 3.3V power supply
Low power dissipation
Operating case temperature: Standard - 0 to +85°C; Extended temperature / Hardened temp. -40 ~ 85c
Two year standard warranty
RoHS Compliant
Absolute Maximum Ratings:
Table 1 - Absolute Maximum Ratings
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
Notes |
Storage Temperature |
TS |
-40 |
|
+85 |
°C |
|
Supply Voltage |
VCC |
-0.5 |
|
3.6 |
V |
|
Operating Relative Humidity |
- |
5 |
|
95 |
% |
|
Note:
Stress in excess of the maximum absolute ratings can cause permanent damage to the module.
Table 2 - Operating Conditions
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
Notes |
Operating Case Temperature |
TC |
0 |
|
85 |
°C |
|
Power Supply Voltage |
VCC |
3.13 |
3.3 |
3.47 |
V |
1 |
Power Supply Current |
ICC |
|
325 |
385 |
mA |
|
Maximum Voltage |
Vmax |
|
|
4 |
V |
2 |
Surge Current |
Isurge |
10 |
|
30 |
mA |
3 |
Data Rate |
|
|
|
1000 |
Mbps |
|
Notes:
1. 1.2W max power over full range of voltage and temperature. See caution note below
2. Hot plug above steady state current. See caution note below
3.10/100/1000 BASE-T operation requires an SGMII interface with no clocks in the host system, and the module will operate as 1000BASE-T when the host system uses SERDES interface.
Order Information:
PN |
Data Rate |
Wavelength |
Distance/Connector |
Temperature |
Compatible to Cisco PN * |
|
|||||
Copper 10/100/1000M SFP Transceivers (standard) |
|
|
|
|
|
E-S45710 |
10/100/1000Mbps |
N/A |
100m; RJ45 |
0~70c |
|
E-S45710-H |
10/100/1000Mbps |
N/A |
100m; RJ45 |
-40~85c |
|
Copper 10/100/1000M SFP (compatible) |
|
|
|
|
|
E-C45710-(x) |
10/100/1000Mbps |
N/A |
100m; RJ45 |
0~70c |
GLC-T , SFP-GE-T, GLC-TE Copper GLC-T, GLC-T= SFP, Cisco-1000BASE-T SFP |
E-C45710-H-(x) |
10/100/1000Mbps |
N/A |
100m; RJ45 |
-40~85c |
GLC-T , SFP-GE-T, GLC-TE Copper GLC-T, GLC-T= SFP |
* The Matrix covers only part of Cisco PNs. Please contact us by either email or phone call for any question about compatibility vs. Part Number of the brands, or special spec requirements:
Email: question@electrep.com
Ph: 650-226-3165
** There may be a letter in the brackets () for the system brand that the SFP+ module is compatible to - e.g. -(J) means "Juniper-Compatible
I would like to thank you for helping with this order. Things are going well and we are very happy with your service and products.
Mark E. Brantner
Columbia Fiber Solutions
Spokane, WA
or call 1-800-352-2698 (for all questions)
100% Secured Cart |